There is no doubt that good habits matter. Taking care of a compressor also means carrying out good maintenance, on which the lifetime of the compressor itself depends.
For this reason, as well as using quality components, if you want to secure a long life cycle for your machine, avoid downtime and achieve energy savings, make sure you carry out preventive maintenance correctly.
First steps: tips for a long life cycle of your compressor
Even before you start up a screw compressor, it is important to carry out a few simple steps.
INSTALLATION
Ideally, you should have a “compressor room” with adequate dimensions for the type of machine to be installed.
It is therefore recommended to identify a location away from heat sources and dust, and to place the compressor on a flat surface, in a clean and well-ventilated area. You must pay attention to accessibility: there should be a free space of at least 1 metre on each side of the compressor. This allows easier and faster maintenance work as well as reducing the risk of overheating.
PREVENTIVE MAINTENANCE
It is widely known that, in order to increase performance and extend the life cycle, a preventive maintenance program using original parts is necessary.
Why does maintenance matter?
NO DOWNTIME: carrying out compressor maintenance correctly, using original parts, is a fundamental aspect for preventing downtime with consequent repercussions on production
ENERGY SAVING: preventive maintenance helps keep a compressor always at maximum efficiency, thus avoiding progressive increases in energy costs due to higher system pressure drops caused by the wear-and-tear of components or the clogging of filters.
LIFE CYCLE: In order to guarantee a long life cycle for the compressor, it is vital to carry out maintenance following the maintenance plan provided by the manufacturer, at the right time and using original spare parts.
When and how often should you do maintenance?
Firstly, we should make a distinction between ordinary maintenance, aimed at always keeping the compressor at peak efficiency, and special maintenance, which consists in repairing or replacing the various parts of the compressor after a high number of working hours.
After 2000 hours:
After 4000 hours:
After 8000 hours
After 20000 hours
What do you need to carry out maintenance?
The use of original spare parts is always recommended for maintenance operations.
In terms of logistics optimization, it is advisable to use specific spare part kits designed for the type of operation to be carried out.
In fact, VMC caters for this need by giving you the possibility of buying “sub-kits” for maintenance operations on specific components of the machine (minimum pressure valve or thermostatic valve, for instance), and this entails a clear economic benefit for customers, who can purchase only what they actually need.
With VMC spare part kits you can count on original spare parts with an excellent quality-price ratio.
Learn more about VMC SPARE PART KITS
Who should carry out maintenance?
It is always advisable to rely on expert and qualified staff for ordinary and special maintenance operations.
How can you prevent the wear-and-tear of components?
We should bear in mind that the level of wear-and-tear of compressor components can vary considerably depending on the application field and on the operating parameters.
For this reason, we recommend periodic inspection of the components and advise carrying out ordinary maintenance using original VMC maintenance kits. Instructions for their use are included in the maintenance and troubleshooting document.