Top slogan
Logo

Optional item

OIL RECOVERY VIEWER MOD. VRO
It allows seeing the oil recovered from the separator filter flowing to the air-end. Outfitted with a check valve and available with orifice sizes from 0.6 to 3.5 mm. To be installed between the separator filter and the air-end. Also available in stainless steel.
PROPORTIONAL CONTROL VALVE MOD. GE300
It modulates the intake valve opening based on the requested working pressure. Outfitted with extra ports for accelerator and manometer. Working pressure adjustable from 6 to 15 barg. To be installed between the separator tank and the intake valve.
AIR-INJECTION VALVE MOD. ISGN
It eliminates noise during the unloading phase through air injection into the air-end. Installed on the intake valve and connected to the separator tank.
BLOW DOWN VALVE MOD. GHS
Pneumatic valve used to blow down pressure from the circuit when the compressor is shut down. Installed on the intake valve or the air-end and connected to the separator tank.
ACCELERATOR MOD. H
Pneumatic device that controls the internal combustion engine speed based on the working pressure. Installed on the diesel engine and connected to the proportional control valve.
PILOT VALVE
The pilot valve is a device that allows control of a compressor’s operating pressure or the activation of other devices such as accelerator cylinders. Usually installed on the storage tank, it has two adjustment screws: one sets the maximum operating pressure, the other sets the reactivation pressure.

NEWSLETTER

Click here to subscribe

to our periodic Newsletter.

CERTIFIED QUALITY

We operate according to the highest international standards to guarantee quality (ISO 9001), environmental protection (ISO 14001) and occupational health and safety (ISO 45001).