An overview of VMC product

Overview of VMC products to discover our innovative and high-performance range

During its more than 40 years of activity, VMC has revolutionized the world of compressed air thanks to the perfect integration of components, transforming the traditional concept of screw compressor into a flexible, functional, compact, eco-sustainable, economical, and versatile working tool to meet the needs of each customer and in many fields, with 13 patents to testify the innovative strength of this reality. But what products are available in the VMC range? Here is an overview to discover them all!

PACK SMART

It is the best expression of integration and technological optimization that VMC can offer in the compressor market. Synthesizing all the advantages of a problem-solving philosophy, VMC heralds a universal range of products/solutions for each customer’s specific needs. Among its advantages, we find the cost-effectiveness and engineering time-reduction, a first-rate de-oiling system, the user-friendliness and speed of assembly on a compressor, the reduced overall dimensions, user-friendliness of use, excellent performance, extreme resilience, and a variety of combinations.

OIL-INJECTED AIR-ENDS

Here are their main feature:

- ROTOR PROFILE: this ensures a higher air-flow rate for less energy consumption. 
- ROTOR ADJUSTMENT: for fast and reliable maintenance.
- BEARINGS: radial and thrust bearings have been engineered for generous reserve.
- SHAFT SEAL: to avoid oil leakages. 
- DIRECT DRIVEN: it can be supplied with a relative direct-driven kit (bell housing + spider couplings). 

COMBINATION BLOCKS VTDM SERIES

It includes a thermostatic valve, a minimum pressure valve, supports for spin-on separators, oil filters, and relative nipples, as well as extra ports to monitor the pressure in the separator tank and connections to the intake valve, and scavenge line. Combination blocks can be threaded or flanged on a separator tank or assembled separately. 

COMBINATIONS BLOCK VDM SERIES

It includes a minimum pressure valve, supports for spin-on separators and relative nipples, as well as extra ports to monitor the pressure in the separator tank, and connections to the intake valve and scavenge line. Combination blocks can be threaded or flanged on a separator tank or assembled separately. The VDM Combination Block is also available for Natural Gas and Water Lubricated applications.


PRACTIKO UD

It has a minimum pressure valve, including a check valve, with support for a spin on separators and oil filters. Besides, a thermostatic valve is available at different working temperatures. The sump tank includes an oil level viewer, oil filler plug, and drainage tap, and it comes with a safety valve.

INTAKE VALVES

RB-RBC SERIES

Assembled on the inlet port of an air-end housing, the intake valves of the RB & RBC series are Normally Closed. They include a butterfly operated by a servo-cylinder controlling the airflow rate and the working pressure, a check valve preventing backflow of oil at a compressor shutdown, and a blow-down valve setting up the discharge time upon request. They are available at different voltages, as well as with connection flanges and certifications.

RH-RHC SERIES

Assembled on the inlet port of an air-end housing, the intake valves of the RH & RHC Series are Normally Open (NO) and only with a vertical design. They include a poppet operated by an internal piston controlling the airflow rate and the working pressure, a check valve preventing backflow of oil at a compressor shutdown, and a blow-down valve setting up the discharge time upon request. The RH & RHC Series are also available for Natural Gas and Water Lubricated applications. 

MINIMUM PRESSURE VALVES

G SERIES

Usually installed on the discharge port of the separator tank, minimum pressure valves are available in a threaded or flanged version. They include a poppet to maintain a minimum pressure in the separator tank when the compressor is started and a check valve to prevent air backflow from the line.

THERMOSTATIC VALVES

VT-VTS-VTFT SERIES

It is installed among the separator tank, the cooler, and the air-end housing. It is run by a thermostatic unit available at different working temperatures, passing the oil towards the cooler when it reaches the set-up temperature. Several different versions of thermostatic valves are available.


IDLING DEVICE

It is usually installed on the air tank receiver of a piston compressor to control its working pressure. It includes a non-return valve and an adjusting screw setting up the cut-on/cut-off pressure. An extra port can be connected to the accelerator/actuator. It is available in different versions based on the various piston compressor sizes.