LEADER IN THE PRODUCTION OF PROFESSIONAL INDUSTRIAL COMPRESSORS

Sorry but the services of the customers are temporarily disabled.
Soon they will be available again with new features and services for our customers.

Untitled Document

Optional item

../uploaded_files/attachments/202005181589814798/other_vmc.png

 

OIL RECOVERY VIEWER mod. VRO

OIL RECOVERY VIEWER mod. VRO

It allows seeing the oil recovered from the separator filter and flowing to the air-end. Outfitted with a check valve and available with different orifice sizes (from 0,6mm up to 3,5mm), this valve has to be installed between the separator filter and the air-end. It can also be supplied in STAINLESS STEEL upon request.
PROPORTIONAL CONTROL VALVE mod. GE300

PROPORTIONAL CONTROL VALVE mod. GE300

It modulates the intake valve opening and closing based on the requested working pressure from the line. Outfitted with extra ports to be connected to the accelerator/ actuator and manometer, it is available both in a positive and negative version. Working pressure can be set up through an adjusting screw from 6 to 15 barg. It has to be installed between the separator tank and intake valve.
AIR-INJECTION VALVE mod. ISGN

AIR-INJECTION VALVE mod. ISGN

This valve eliminates any noise during the unloading phase through air injection into the air-end. It is usually installed directly on the intake valve and connected to the separator tank.

BLOW DOWN VALVE mod. GHS

BLOW DOWN VALVE mod. GHS

This pneumatic valve is used to blow down pressure from the pumping circuit when the compressor is shut down. This valve is usually installed directly either on the intake valve or the air-end and connected with the separator tank.
ACCELERATOR mod. H

ACCELERATOR mod. H

This pneumatic device is used to control the diesel engine speed based on the working pressure of the machine. It is usually installed directly on the diesel motor and connected to the proportional control valve.